|
|
 |
|
|
1.The products that contain moisture up to 5% could
not be packed by PVA water-soluble film.
2.PVA water-soluble film should be kept in PE film
to prevent moisture and crinkle when it is not being
used.
3.Storage condition: room temperature 15~35 ℃,
humidity 40~60%. Best for using all film after
remove packaging to avoid moisture.
4.The elasticity of the film is larger than other
film, specific equipment is needed when automatic
pack machine are applied.
5.Do not touch with the wet hand. Be careful so as
not to drop sweat, saliva and drop of water on the
film.
6. PVA film has the good characteristic to resist
the oils and fats such as animal oils, vegetable
oils, mineral oils, fats, organic solvents and the
hydrocarbons to penetrate. However, it can be
affected by h3 acid, h3 base, chlorine free radical
and some special chemical which can react with PVA
such as borax, boracic acid and coloring matter and
so on, so it isn't fit for packing the above things.
7.The brightness of face and inverse of the film is
different. The face is bright and the inverse is
obscuration. To use it as bag, inverse is inside and
face is outside and felting be avoid. If you use it
for embroidering, the inverse is adown for best
result.
8.When technical problem occurred in course of
using, please contact with your supply agent.
|
|
|
|
Copying(C)2008China
JiangSu Changzhou Water Soluble Co.,Ltd.(Old name is Changzhou Kelin PVA Water Soluble Films Co.,Ltd.)All Rights
Reserved.